SecurityMan IPcam-SD - User manual - Manual (Page 71)

67
The “AutoGetAddr” button can be of help to obtain the correct IP address, Subnet
Mask, and Gateway of your local area network settings. If you are unsure of what
IP address to use please click on the “AutoGetAddr” button and then change the
last or the 4th sets of the “IP Address” to a higher number such as “178”.
IMPORTANT NOTE: Please check with your IPS (Internet Service Provider) if you
are unsure as to what IP address, Subnet Mask, and Gateway to use or reference
our QSG (Quick Start Guide) to obtain an IP address.
• • • ADD DEVICE
The ADD DEVICE option adds the selected/configured device to your CMS “Area
List”.
• • • EXAMPLE HOW TO ADD THE IPCAM-SD TO THE CMS
The first thing you need to do is create a group. Highlight “Zone List” (in the
device list area) and click on the “ADD AREA” button to bring up the area name
input box and give your group a name like “HOME” (if your primary area will
be your home) as shown in the image below (leave Up Zone blank) and click ok
when you are done.