SecurityMan IPcam-SD - User manual - Manual (Page 85)

J K L M N
81
• • • • VIDEO MOTION
The VIDEO MOTION sub-menu located in the “Alarm” menu option consists
of 14 settings that are used to configure the IPcam-SD’s motion detection
features. These settings are:
A. Channel – used to select which camera you want to configure.
B. Enable – enables/disables motion detection alerts.
C. Sensitivity (drop down) – used to adjust the motion detection
sensitivity level.
D. Schedule – used to setup a recording schedule.
E. Action Area – used to control what the IPcam-SD should do when an
event occurs.
F. PTZ Activation – enables motion activated tour and preset movement.
G. Notification Area – used to select how you want to be notified when
an event occurs.
H. Interval – motion detection delay time to record.
I. Delay – post-Record time frame.
J. Copy – copies the current configuration settings.
K. Paste – pastes the configuration settings to the selected camera.
L. Refresh – restores any changes made.
M. OK – saves the changes.
N. Cancel – exits the menu without saving the changes.