SecurityMan IPcam-SD - User manual - Manual (Page 116)

112
MIRROR IMAGE
The MIRROR IMAGE option allows you to reverse the image from left to right
and right to left as if you are looking into a reverse mirror image.
FLIP IMAGE
The FLIP IMAGE option allows you to flip the camera image up side down.
This option is used whenever the IP camera is installed to a ceiling.
CAMERA NAME
The CAMERA NAME option enables/disables the cameras name from being
visible in live view screen. The system default setting is checked. This option
also allows the camera name and date/time stamp to be position and move
anywhere on the screen.
NOTE: Unchecking the camera name will only take out the camera name, the
date/time stamp can still be positioned anywhere on the screen by using the
“Position” button.
IR SWAP
The IR SWAP by default is unchecked. Please check it in cases where the
color of the images maybe degrading or fading away. Checking it will ensure
that the IR cutter used inside the camera are properly seated correctly.
ANTI-FLICKER
The ANTI-FLICKER option allows video to be displayed smoother to prevent
the camera image from flickering while monitoring or pan and tilt movements.
The system default setting is enabled (checked), uncheck to disable anti-flicker
option.
REFRESH
The REFRESH button discards the changes you made to the current settings
and sets them back to the way they were when the configuration window
was first opened.
OK
The OK button saves your changes and exits back the previous screen.
CANCEL
The CANCEL button discards any changes made and exits back to the
previous screen.