SecurityMan IPcam-SD - User manual - Manual (Page 112)

FTP
The
FTP service allows you to enable (checked) or disable (unchecked)
the FTP file transfer services. Double click on this option to bring up its
corresponding configuration window as shown below. When an event occurs,
the system will stream video to record to your FTP server (picture, video or
both). To set up video recording steam to your FTP, check the Enable box,
input your server address (ie. ftp.securitymaninc.com ), give it a port number
(ie. 21), enter your FTP user account name, and your FTP account password
or check Anonymous for public folder streaming. Enter the file size or file
length in megabytes (default is 128MB) and provide a directory name starting
with a “ / “ (forward slash). Click OK to confirm set up or click CANCEL to
cancel.
NOTE: The directory Name (path) for FTP cannot be blank and it has to start
with a forward slash “ / “ (system default) to start the recording directory.
108
REAL TIME STEAMING PROTOCOL
The
REAL TIME STEAMING PROTOCOL enables the video footages to be able
to live stream to any real time software player. Player such as real time player,
VLC player, and etc can be used to live steam and monitor the IPcam-SD after
this service is set up. Make sure that “RTP over RTSP (TCP)” is selected under
preferences/options>Inputs/Codecs sections of the players before streaming.
Click on the box to enable real time streaming protocol and then input the port
number, the default port is 34569. Click OK to confirm set up or click CANCEL
to cancel.