SecurityMan IPcam-SD - User manual - Manual (Page 90)

86
NOTE: Sending email can only attached pictures only, not video.
• FTP – streams the event to your FTP site, supporting both video and picture
streaming. To setup an FTP account, go to System/Netservice/FTP.
DELAY
The DELAY (post-record) time frame lets you dictate how much longer the
IPcam-SD should keep recording after its default 10 second (per blind event)
recording has expired. For example, if a blind event occurs at 5:00:00 pm
and you have the delay time set to 15 seconds, the actual recording will not
stop until 5:00:35 pm (10 second default + 15 second delay).
COPY
The COPY button can be used to copy the current configuration on the screen
to the other cameras available through the CMS (when more than one camera
is available).
PASTE
The PASTE button is used to paste the configuration settings that were
copied to the selected camera.
REFRESH
The REFRESH button discards the changes you made to the current settings
and sets them back to the way they were when the configuration window was
first opened.
OK
The OK button saves your changes and exits back the previous screen.
CANCEL
The CANCEL button discards any changes made and exits back to the
previous screen.