SecurityMan IPcam-SD - User manual - Manual (Page 42)

38
• • • I/O TRIGGER
The I/O (input/output) TRIGGER tab located on the Alarm Setting tab consists
of 8 settings that are used to configure how the CMS will operate whenever
alarm I/O events occur. These settings are:
NOTE: Please remember to click the “APPLY” button located at the bottom
of each tab to save your changes and click on the “X” located at the top right
corner of the screen exit.
A. Device List – used to select which device you want to configure.
B. Camera Mapping – camera-to-I/O mapping. Map the IPcam-SD (right
side) to the Alarm Input Mapping (left side) by selecting CAM1 and “Add”.
C. Alarm Enable – enables the CMS to monitor I/O alerts.
D. Alarm Sound – enables/disables audible alert notification.
E. Sound File Path – used to specify the location of the sound file you
want to use (.wave).
F. Full CH Display – enables/disables “Single Channel” live view for
the camera being triggered.
G. Display Time – full channel display time configuration.