Yokogawa ADMAG AXF User Manual
User’s manual
Advertising
Table of contents
Document Outline
- Contents
- 1. INTRODUCTION
- 2. HANDLING PRECAUTIONS
- 3. INSTALLATION
- 3.1 Piping Design Precautions
- 3.2 Handling Precautions
- 3.3 Mounting Procedures
- 3.3.1 Nominal Diameter 2.5 mm (0.1in.) to 10 mm (0.4 in.), UnionJoint Type
- 3.3.2 Nominal Diameter 2.5 mm (0.1in.) to 40 mm (1.5 in.), WaferType
- 3.3.3 Nominal Diameter 50 mm (2.0in.) to 300 mm (12.0 in.), WaferType
- 3.3.4 Nominal Diameter 2.5 mm (0.1in.) to 400 mm (16 in.), FlangeType
- 3.3.5 Nominal Diameter 500 mm (20in.) to 2600 mm (104 in.), FlangeType
- 3.3.6 Sanitary Type
- 4. WIRING
- 5. MAINTENANCE
- 5.1 Changing Direction ofElectrical Connection
- 5.2 Removing, Cleaning,and Installing ReplaceableElectrodes(General-PurposeUse Type Only)
- 5.3 Removing and InstallingAdapters forSanitary Types
- 5.4 Maintenance forConverter (IntegralFlowmeter Only)
- 5.5 Setting of Switches(Integral FlowmeterOnly)
- 5.6 Regular InspectionItems
- 5.7 Excitation Coil andInsulation ResistanceCheck (RemoteFlowtube Only)
- 5.8 Troubleshooting
- 6. OUTLINE
- 7. PED (PRESSURE EQUIPMENT DIRECTIVE)
- 8. EXPLOSION PROTECTED TYPEINSTRUMENT
- INSTALLATION AND OPERATING PRECAUTIONS FORTIIS FLAMEPROOF EQUIPMENT
- REVISION RECORD