Yokogawa ADMAG AXF - Manual (Page 21)

IM 01E20D01-01E 3-11
3. INSTALLATION
Figure 3.3.4 Mounting Procedure for Wafer Type (size: 50 mm (2 in.) to 300 mm (12 in.))
Table 3.3.7 Wafer Type Tightening Torque Values for Metal Piping
Tightening torque values for PFA/Polyurethane Rubber/Natural Soft Rubber/EPDM Rubber lining type
Gasket types
within flowtube
No gasket (standard)
Gasket types
for user’s flange
Non-asbestos fiber gasket, PTFE-sheathed non-asbestos gasket
(optional codes BCF and BSF), or the equivalent in hardness
Flange ratings
Size
mm (inch)
Gasket types
within flowtube
Gasket types
for user’s flange
Flange ratings
Size
mm (inch)
50 (2.0)
65 (2.5)
80 (3.0)
100 (4.0)
125 (5.0)
150 (6.0)
200 (8.0)
250 (10)
300 (12)
JIS 10K
45.0 to 56.8
{458.9 to 579.2}
[398.3 to 502.7]
61.3 to 70.5
{625.1 to 718.9}
[542.5 to 624.0]
35.0 to 40.3
{356.9 to 410.9}
[309.8 to 356.7]
46.1 to 53
{470.1 to 540.5}
[408.0 to 469.1]
73.7 to 84.8
{751.5 to 864.7}
[652.3 to 750.5]
85.4 to 98.2
{870.8 to 1001}
[755.8 to 869.1]
78.8 to 90.6
{803.5 to 923.9}
[697.4 to 801.8]
119.4 to 137.3
{1218 to 1400}
[1057 to 1215]
83.0 to 99.2
{846.4 to 1012}
[734.6 to 878]
ANSI Class 150
45.0 to 56.8
{458.9 to 579.2}
[398.3 to 502.7]
61.3 to 70.5
{625.1 to 718.9}
[542.5 to 624.0]
76.0 to 80.9
{775.0 to 825.0}
[672.6 to 716.0]
46.1 to 53
{470.1 to 540.5}
[408.0 to 469.1]
73.7 to 84.8
{751.5 to 864.7}
[652.3 to 750.5]
85.4 to 98.2
{870.8 to 1001}
[755.8 to 869.1]
113.6 to 135.8
{1158 to 1385}
[1005 to 1202]
119.4 to 137.3
{1218 to 1400}
[1057 to 1215]
105.2 to 121.0
{1073 to 1234}
[931.1 to 1071]
DIN PN10
—
—
—
—
—
—
113.6 to 135.8
{1158 to 1385}
{1005 to 1202]
119.4 to 137.3
{1218 to 1400}
{1057 to 1215]
105.2 to 121.0
{1073 to 1234}
{931.1 to 1071]
JIS20K
22.5 to 25.9
{229.4 to 264.1}
[199.1 to 229.2]
30.8 to 35.4
{314.1 to 361.0}
[272.6 to 313.3]
39.9 to 45.9
{406.9 to 468.1}
[353.1 to 406.2]
52.9 to 60.8
{539.4 to 620.0}
[468.2 to 538.1]
80.5 to 92.6
{820.9 to 944.3}
[712.5 to 819.5]
61.0 to 70.2
{622.0 to 715.8}
[539.9 to 621.3]
87.5 to 100.6
{892.3 to 1026}
[774.4 to 890.3]
—
—
ANSI Class 300
22.5 to 25.9
{229.4 to 264.1}
[199.1 to 229.2]
30.8 to 35.4
{314.1 to 361.0}
[272.6 to 313.3]
39.9 to 45.9
{406.9 to 468.1}
[353.1 to 406.2]
52.9 to 60.8
{539.4 to 620.0}
[468.2 to 538.1]
80.5 to 92.6
{820.9 to 944.3}
[712.5 to 819.5]
61.0 to 70.2
{622.0 to 715.8}
[539.9 to 621.3]
87.5 to 100.6
{892.3 to 1026}
[774.4 to 890.3]
—
—
DIN PN16
—
56.1 to 70.8
{572.1 to 722.0}
[496.5 to 626.6]
39.9 to 45.9
{406.9 to 468.1}
[353.1 to 406.2]
52.9 to 60.8
{539.4 to 620.0}
[468.2 to 538.1]
80.5 to 92.6
{820.9 to 944.3}
[712.5 to 819.5]
91.2 to 96.3
{930.0 to 982.0}
[807.2 to 852.3]
87.5 to 100.6
{892.3 to 1026}
[774.4 to 890.3]
—
—
DIN PN40
50.0 to 57.5
{509.9 to 586.3}
[442.5 to 508.9}
—
—
—
—
—
—
—
—
JIS F12
(JIS 75M)
—
—
68.4 to 78.7
{697.5 to 802.5}
[605.4 to 696.5]
88.6 to 101.9
{903.5 to 1039}
[784.1 to 901.9]
75.1 to 86.4
{765.8 to 881.0}
[664.7 to 764.7]
86.3 to 99.2
{880.0 to 1012}
[763.8 to 878.0]
88.6 to 101.9
{903.5 to 1039}
[784.1 to 901.9]
158.1 to 181.8
{1612 to 1854}
[1399 to 1609]
146.6 to 168.6
{1495 to 1719}
[1297 to 1492]
Tightening torque values for Ceramics lining type
Fluororesin with ceramic fillers (Valqua #7020) gasket (standard), or fluororesin with carbon gasket (optional code GF)
Non-asbestos gasket, PTFE-sheathed non-asbestos gasket (optional codes BCF and BSF), or the equivalent in hardness
50 (2.0)
80 (3.0)
100 (4.0)
150 (6.0)
200 (8.0)
JIS 10K
29.9 to 49.8
{304.9 to 507.8}
[264.6 to 440.8]
37.1 to 61.8
{378.3 to 630.2}
[328.4 to 547.0]
48.9 to 81.5
{498.6 to 831.1}
[432.8 to 721.3]
101.4 to 169.0
{1034 to 1723}
[897.5 to 1496]
142.3 to 237.2
{1451 to 2419}
[1259 to2099]
ANSI Class 150
29.9 to 49.8
{304.9 to 507.8}
[264.6 to 440.8]
37.1 to 61.8
{378.3 to 630.2}
[328.4 to 547.0]
48.9 to 81.5
{498.6 to 831.1}
[432.8 to 721.3]
101.4 to 169.0
{1034 to 1723}
[897.5 to 1496]
142.3 to 237.2
{1451 to 2419}
[1259 to2099]
DIN PN10
—
—
—
—
142.3 to 237.2
{1451 to 2419}
[1259 to2099]
JIS20K
30.5 to 50.9
{311.0 to 519.0}
[269.9 to 450.5]
37.6 to 62.7
{383.4 to 639.4}
[332.8 to 554.9]
49.9 to 83.1
{508.8 to 847.4}
[441.6 to 735.5]
104.4 to 174.0
{1065 to 1774}
[924.0 to 1540]
98.5 to 164.2
{1004 to 1674}
[871.8 to 1453]
ANSI Class 300
30.5 to 50.9
{311.0 to 519.0}
[269.9 to 450.5]
37.6 to 62.7
{383.4 to 639.4}
[332.8 to 554.9]
49.9 to 83.1
{508.8 to 847.4}
[441.6 to 735.5]
104.4 to 174.0
{1065 to 1774}
[924.0 to 1540]
98.5 to 164.2
{1004 to 1674}
[871.8 to 1453]
DIN PN16
—
37.6 to 62.7
{383.4 to 639.4}
[332.8 to 554.9]
49.9 to 83.1
{508.8 to 847.4}
[441.6 to 735.5]
104.4 to 174.0
{1065 to 1774}
[924.0 to 1540]
98.5 to 164.2
{1004 to 1674}
[871.8 to 1453]
DIN PN40
32.7 to 54.5
{333.4 to 555.7}
[289.4 to 482.4]
—
—
—
—
JIS F12
(JIS 75M)
—
56.3 to 93.8
{574.1 to 956.5}
[498.3 to 830.2]
74.2 to 123.7
{756.6 to 1261}
[656.7 to 1095]
82.2 to 137.0
{838.2 to 1397}
[727.5 to 1213]
86.7 to 144.6
{884.1 to 1475}
[767.3 to 1280]
T0308.EPS
N-m
{kgf-cm}
[in-lbf]
Unit:
N-m
{kgf-cm}
[in-lbf]
Unit:
Vertical mounting
F0312b.EPS
Horizontal mounting
F0312c.EPS
Centering device
(four units)
F0312a.EPS
*Nut
*Through-bolt Piping-side flange
*Gasket
(two units)
Mini-
flange
*: These items can be ordered optionally.
If they are provided by the user, choose nuts and
bolts in compliance with the flange ratings.
Housing