Yokogawa ADMAG AXF - Manual (Page 22)

IM 01E20D01-01E 3-12
3. INSTALLATION
Table 3.3.8 Wafer Type Tightening Torque Values for PVC Piping
Tightening torque values for PFA lining type
Gasket types
within flowtube
Fluororubber gasket (optional codes GA, GC, and GD)
Gasket types
for user’s flange
Fluororubber gasket, chloroprene rubber gasket (optional codes BSC and BCC), or the equivalent in hardness
Flange ratings
Size
mm (inch)
Gasket types
within flowtube
Gasket types
for user’s flange
Flange ratings
Size
mm (inch)
50 (2.0)
65 (2.5)
80 (3.0)
100 (4.0)
125 (5.0)
150 (6.0)
200 (8.0)
JIS 10K
9.9 to 16.5
{101.0 to 168.3}
[87.6 to 146.0]
14.2 to 23.7
{144.8 to 241.7}
[125.7 to 209.8]
8.0 to 13.3
{81.6 to 135.6}
[70.8 to 117.7]
11.3 to 18.8
{115.2 to 191.7}
[100.0 to 166.4]
18.8 to 31.3
{191.7 to 319.2}
[166.4 to 277.0]
22.5 to 37.6
{229.4 to 383.4}
[199.1 to 332.8]
22.1 to 36.9
{225.4 to 376.3}
[195.6 to 326.6]
ANSI Class 150
9.9 to 16.5
{101.0 to 168.3}
[87.6 to 146.0]
14.2 to 23.7
{144.8 to 241.7}
[125.7 to 209.8]
17.4 to 26.7
{177.4 to 272.3}
[154.0 to 236.3]
11.3 to 18.8
{115.2 to 191.7}
[100.0 to 166.4]
18.8 to 31.3
{191.7 to 319.2}
[166.4 to 277.0]
22.5 to 37.6
{229.4 to 383.4}
[199.1 to 332.8]
31.9 to 55.3
{325.3 to 563.9}
[282.3 to 489.4]
DIN PN10
—
—
—
—
—
—
31.9 to 55.3
{325.3 to 563.9}
[282.3 to 489.4]
JIS20K
10.6 to 17.6
{108.1 to 179.5}
[93.8 to 155.8]
15.5 to 25.9
{158.1 to 264.1}
[137.2 to 229.2]
9.7 to 16.1
{98.9 to 164.2}
[85.8 to 142.5]
14.2 to 23.6
{144.8 to 240.7}
[125.7 to 208.9]
22.3 to 37.2
{227.4 to 379.3}
[197.4 to 329.2]
27.2 to 45.3
{277.4 to 461.9}
[240.7 to 400.9]
27.3 to 45.3
{278.4 to 461.9}
[241.6 to 400.9]
ANSI Class 300
10.6 to 17.6
{108.1 to 179.5}
[93.8 to 155.8]
15.5 to 25.9
{158.1 to 264.1}
[137.2 to 229.2]
9.7 to 16.1
{98.9 to 164.2}
[85.8 to 142.5]
14.2 to 23.6
{144.8 to 240.7}
[125.7 to 208.9]
22.3 to 37.2
{227.4 to 379.3}
[197.4 to 329.2]
27.2 to 45.3
{277.4 to 461.9}
[240.7 to 400.9]
27.3 to 45.3
{278.4 to 461.9}
[241.6 to 400.9]
DIN PN16
—
28.2 to 51.8
{287.6 to 528.2}
[249.6 to 458.4]
9.7 to 16.1
{98.9 to 164.2}
[85.8 to 142.5]
14.2 to 23.6
{144.8 to 240.7}
[125.7 to 208.9]
22.3 to 37.2
{227.4 to 379.3}
[197.4 to 329.2]
40.7 to 62.1
{415.0 to 633.2}
[360.2 to 549.6]
27.3 to 45.3
{278.4 to 461.9}
[241.6 to 400.9]
DIN PN40
9.5 to 15.9
{96.9 to 162.1}
[84.1 to 140.7]
—
—
—
—
—
—
JIS F12
(JIS 75M)
—
—
15.4 to 25.6
{157.0 to 261.0}
[136.3 to 226.6]
21.1 to 35.1
{215.2 to 357.9}
[186.7 to 310.6]
18.5 to 30.8
{188.6 to 314.1}
[163.7 to 272.6]
21.8 to 36.3
{222.3 to 370.2}
[192.9 to 321.3]
23.8 to 39.6
{242.7 to 403.8}
[210.6 to 350.5]
Tightening torque values for Ceramics lining type
Fluororubber gasket (optional codes GA, GC, and GD)
Fluororubber gasket, chloroprene rubber gasket (optional codes BSC and BCC), or the equivalent in hardness
50 (2.0)
80 (3.0)
100 (4.0)
150 (6.0)
200 (8.0)
JIS 10K
4.5 to 7.4
{45.89 to 75.46}
[39.83 to 65.49]
4.4 to 7.3
{44.87 to 74.44}
[38.94 to 64.61]
6.4 to 10.7
{65.26 to 109.1}
[56.64 to 94.7]
15.1 to 25.2
{154.0 to 257.0}
[133.6 to 223.0]
23.4 to 39.0
{238.6 to 397.7}
[207.1 to 345.2]
ANSI Class 150
4.5 to 7.4
{45.89 to 75.46}
[39.83 to 65.49]
4.4 to 7.3
{44.87 to 74.44}
[38.94 to 64.61]
6.4 to 10.7
{65.26 to 109.1}
[56.64 to 94.7]
15.1 to 25.2
{154.0 to 257.0}
[133.6 to 223.0]
23.4 to 39.0
{238.6 to 397.7}
[207.1 to 345.2]
DIN PN10
—
—
—
—
23.4 to 39.0
{238.6 to 397.7}
[207.1 to 345.2]
JIS20K
4.8 to 7.9
{48.95 to 80.56}
[42.48 to 69.92]
4.8 to 7.9
{48.95 to 80.56}
[42.48 to 69.92]
7.2 to 11.9
{73.42 to 121.3}
[63.72 to 105.3]
17.6 to 29.3
{179.5 to 298.8}
[155.8 to 259.3]
18.6 to 31.6
{189.7 to 322.2}
[164.6 to 279.7]
ANSI Class 300
4.8 to 7.9
{48.95 to 80.56}
[42.48 to 69.92]
4.8 to 7.9
{48.95 to 80.56}
[42.48 to 69.92]
7.2 to 11.9
{73.42 to 121.3}
[63.72 to 105.3]
17.6 to 29.3
{179.5 to 298.8}
[155.8 to 259.3]
18.6 to 31.6
{189.7 to 322.2}
[164.6 to 279.7]
DIN PN16
—
4.8 to 7.9
{48.95 to 80.56}
[42.48 to 69.92]
7.2 to 11.9
{73.42 to 121.3}
[63.72 to 105.3]
17.6 to 29.3
{179.5 to 298.8}
[155.8 to 259.3]
18.6 to 31.6
{189.7 to 322.2}
[164.6 to 279.7]
DIN PN40
4.3 to 7.1
{43.85 to 72.4}
[38.06 to 62.84]
—
—
—
—
JIS F12
(JIS 75M)
—
8.6 to 14.4
{87.7 to 146.8}
[76.12 to 127.4]
12.2 to 20.3
{124.4 to 207.0}
[108.0 to 179.7]
14.9 to 24.8
{151.9 to 252.9}
[131.9 to 219.5]
17.1 to 28.6
{174.4 to 291.6}
[151.3 to 253.1]
T0309.EPS
N-m
{kgf-cm}
[in-lbf]
Unit:
N-m
{kgf-cm}
[in-lbf]
Unit: