Yokogawa Button Operated MV2000 - Manual (Page 108)

4-34
IM MV1000-17E
YQ Sets the application timeout
To not use the timeout feature
Syntax YQ p1<terminator>
p1 Application timeout (OFF)
Query YQ?
Example Disable timeout.
YQOFF
Description The settings specified with this command take
effect when you save the settings with the XE
command and power-cycle the MV.
To use the timeout feature
Syntax YQ p1,p2<terminator>
p1 Application timeout (ON)
p2 Timeout value [minutes] (1 to 120)
Query YQ?
Example Enable the application timeout and set the
timeout value to 3 min.
YQON,3
Description The settings specified with this command take
effect when you save the settings with the XE
command and power-cycle the MV.
YT Sets the FTP transfer timing
Syntax YT p1,p2,p3<terminator>
p1 Auto transfer when display and event data
files are generated (ON/OFF)
p2 Auto transfer when report data files are
generated (ON/OFF)
p3 Auto transfer when snapshot data files are
generated (when snapshot is executed) (ON/
OFF)
Query YT?
Example Auto transfer display and event data files. Do not
transfer report data files. Do not transfer image
data files.
YTON,OFF,OFF
Description If the method to save data to an external storage
medium is set to Auto, the MV automatically
transfers data files as they are generated.
For media storage settings, see the MV1000/
MV2000 User’s Manual.
YU Sets the contents to be sent via
e-mail
To send changes in the alarm status
Syntax YU p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,
p11,p12<terminator>
p1 Transmitted content (ALARM)
p2 Recipient 1 ON/OFF
p3 Recipient 2 ON/OFF
p4 Alarm transmission of alarm number 1 ON/OFF
p5 Alarm transmission of alarm number 2 ON/OFF
p6 Alarm transmission of alarm number 3 ON/OFF
p7 Alarm transmission of alarm number 4 ON/OFF
p8 Include instantaneous data ON/OFF
p9 Include source URL ON/OFF
p10 Subject (up to 32 alphanumeric characters)
p11 Header 1 (up to 64 characters)
p12 Header 2 (up to 64 characters)
Query YU[ p1]?
Example Transmit alarms of alarm numbers 1 to 4
including instantaneous data but not including
the source URL to recipient 1. Set the subject to
“ALM” and header 1 to “LP2.”
YUALARM,ON,OFF,ON,ON,ON,ON,ON,OFF,AL
M,LP2
To send e-mail at scheduled times
Syntax YU p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,
p11,p12<terminator>
p1 Transmitted content (TIME)
p2 Recipient 1 ON/OFF
p3 Interval for sending e-mail to recipient 1
(1H, 2H, 3H, 4H, 6H, 8H, 12H, 24H)
p4 Time when e-mail is sent to recipient 1 (00:00
to 23:59)
p5 Recipient 2 ON/OFF
p6 Interval for sending e-mail to recipient 2
(1H, 2H, 3H, 4H, 6H, 8H, 12H, 24H)
p7 Time when e-mail is sent to recipient 2 (00:00
to 23:59)
p8 Include instantaneous data ON/OFF
p9 Include source URL ON/OFF
p10 Subject (up to 32 alphanumeric characters)
p11 Header 1 (up to 64 characters)
p12 Header 2 (up to 64 characters)
Query YU[ p1]?
Example Send e-mail at 17 hours 15 minutes every day
to recipient 1. Do not include instantaneous data
but include the source URL. Set the subject to
“GOOD” and header 1 to “LP2.”
YUTIME,ON,24H,17:15,OFF,,,OFF,ON,
GOOD,LP2
To send system notifications
Syntax YU p1,p2,p3,p4,p5,p6,p7<terminator>
p1 Transmitted content (SYSTEM)
p2 Recipient 1 ON/OFF
p3 Recipient 2 ON/OFF
p4 Include source URL ON/OFF
p5 Subject (up to 32 alphanumeric characters)
p6 Header 1 (up to 64 characters)
p7 Header 2 (up to 64 characters)
Query YU[ p1]?
Example Send system notification e-mail messages
including the source URL to recipient 1. Set the
subject to “SystemAlert” and header 1 to “LP2.”
YUSYSTEM,ON,OFF,ON,SystemAlart,LP2
To send report generation notifications
Syntax YU p1,p2,p3,p4,p5,p6,p7<terminator>
p1 Transmitted content (REPORT)
p2 Recipient 1 ON/OFF
4.6 Basic Setting Commands