Yokogawa Button Operated MV2000 - Manual (Page 33)

IM MV1000-17E
2-18
Page Types (displayed screen types)
• Monitor
Configure the monitor page. The monitor page can display the following items.
• Alarm summary
• Measured and computed values of all channels
• Log (message summary, error log, etc.)
• For screen examples, see “Monitoring with a Browser” in this section.
• Operator
Configure the operator page. You can carry out the following operations in addition to the
functions available on the monitor page.
• Switch the MV display by specifying the display type (trend, historical trend, digital,
bar graph, or overview). You can also specify the trend and historical trend groups.
• Control the MV DISP/ENTER key, arrow keys, and HISTORY key.
• Set and write MV messages.
• For screen examples, see “Monitoring with a Browser” in this section.
Configuring the Monitor Page
• Setting the page type
To configure the monitor page, select
Monitor.
• Selecting On or Off
To display the monitor page on a browser, select
On. Otherwise, select Off.
• Setting the access control
To use access control, select
On. You must enter a user name and password to
display the monitor page. You must set the security and login in the environmental
settings to use this function. For settings, see the MV1000/MV2000 User’s Manual (IM
MV1000-01E).
Configuring the Operator Page
• Setting the page type
To configure the operator page, select
Operator.
• Setting the access control
This setting is the same as that for the monitor page.
• Selecting whether or not to use command input
To use the set and write commands for messages, select
On. Otherwise, select Off.
2.4 Monitoring the MV on a PC Browser