Yokogawa Button Operated MV2000 - Manual (Page 44)

IM MV1000-17E
2-29
Using the Ethernet Interface
1
2
3
4
5
6
7
App
Index
Configuring the SNTP Server
You can configure the MV to run as an SNTP server.
◊ Press MENU and then select Menu tab > Basic setting mode > Menu tab >
Communication (Ethernet) > Server
• SNTP
Set the SNTP parameter under Server to Use or Not (don’t use).
When an SNTP client on the network queries the MV for the time information, the MV
returns the time information.
Port Number
The default value is 123. To change the value:
◊ Press
MENU and then select Menu tab > Basic setting mode > Environment tab >
Communication > Service port
For the selectable range, see section 7.1.
2.7 Synchronizing the Time