LumaSense Technologies INNOVA 1412i - Manual (Page 51)

Chapter 4
______________________________________________________________________
_____________________________________________________________________________
BE6025-15 1412i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 51 of 202
4.3.8 Stopping a Monitoring Task
1. Let the Monitor, monitor for a total period of about 30 minutes
and then press MEASURE.
The following text will appear on the screen:
If you pressed MEASURE accidentally, this screen enables you to
cancel the request to stop the monitoring task in progress – by
pressing S1.
2. Press S3 to stop the task.
The text, which appears briefly on the screen, indicates that the
Monitor is aborting the monitoring task and a summary of the
monitoring task will appear on the display as soon as the Monitor has
aborted the task. For example:
DATA IN DISPLAY MEMORY RECORDED FROM
2014-01-16 09:50 TO 2014-01-16 10:04
4.3.9 Scrolling through Measurement Results after
Completion of a Monitoring Task
All measurement data collected during a monitoring task, is stored in
the Display Memory together with the parameters which describe the
task (a description of the task is given in section 4.3.4 ).
Using the direction push-buttons, you can scroll through the set-up
parameters as well as the individual gas concentration
measurements results as explained in section 4.3.7 . The organisation
of data collected during a monitoring task is illustrated in Fig. 4.4 .
This illustration also shows the function of the various direction keys.
For example, u enables you to move from the measurement results
of one gas to the measurement results of another.
STOP MONITORING TASK ?
NO YES