Triton 97XX Series Operation Manual - Manual (Page 102)

TRITON SYSTEMS, INC. 5-47
O
PERATION
M
ANUAL
- M
ODEL
97XX-Series SECTION 5 - MANAGEMENT FUNCTIONS
9700-S ERIES 9705-S ERIES 9710-S ERIES 9750-S ERIES
PRINTER GRAPHICS
F ACTORY D EFAULT : ENABLED
A CCESS I NSTRUCTIONS :
1. Select TERMINAL CONFIGURATION optioN from the
MANAGEMENT FUNCTIONS screen.
2. Select the PRINTER SETTINGS option.
3. Select PRINTER GRAPHICS.
D ESCRIPTION :
The Printed Graphics feature can only be used when an optional
Memory Expansion Card is installed in the terminal. Triton Con-
nect Software Release 1.8 (or above) allows bit mapped graphics
(in ‘.bmp’ format) to be downloaded to the terminal. This graphic
will be printed on the receipt when the PRINTER GRAPHICS op-
tion has been ENABLED. This feature cannot be supported with
out the addition of an Expansion Memory Card.
To turn on the PRINTER GRAPHICS feature, choose the ENABLE
option on this screen. To inhibit the PRINTER GRAPHICS feature,
press the DISABLE key.
E RROR C ONDITIONS :
If PRINTER GRAPHICS is enabled and there are no graphic im-
ages loaded into the Expansion Memory Card, the receipt printer
will print normal receipts without graphics. There are no error con-
ditions associated with this function.