Triton 97XX Series Operation Manual - Manual (Page 168)

TRITON SYSTEMS, INC. 5-113
O
PERATION
M
ANUAL
- M
ODEL
97XX-Series SECTION 5 - MANAGEMENT FUNCTIONS
9700-S ERIES 9705-S ERIES 9710-S ERIES 9750-S ERIES
BACKUP NUMBER
F ACTORY D EFAULT : NONE
A CCESS I NSTRUCTIONS :
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Select TELEPHONE.
4. Select the BACKUP NUMBER option.
D ESCRIPTION :
The Cash Dispenser communicates with your Processors’ host
computer over a dial up phone line. Some processors allow a
backup phone number to try if the primary number fails to connect.
When this function is selected, the current phone number is dis-
played (if nothing appears on the screen, no number is set). Se-
lect CHANGE to blank the current entry, and then enter the de-
sired phone number. The phone number may be up to 15 digits
long. It can also contain a dialing prefix, such as a ‘9’ for an out-
side line, if necessary. If you need to pause after the prefix, place
a comma in the number for a two-second delay at that point. Press-
ing the <CTRL> key first, then the <0> key, followed by the <RIGHT
ARROW> select the comma. Make sure to enter the long distance
prefix ‘1’ if you are dialing an 800 number or a toll long distance
number. Do not enter dashes in the number.
E
RROR
C
ONDITIONS
:
There are no error conditions directly associated with this function.