Triton 97XX Series Operation Manual - Manual (Page 97)

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS O
PERATION
M
ANUAL
- M
ODEL
97XX-Series
5-42
9700-S ERIES 9705-S ERIES 9710-S ERIES 9750-S ERIES
ADMINISTRATION PASSWORD
F ACTORY D EFAULT : ‘987654’
A CCESS I NSTRUCTIONS :
1. Select the PASSWORD MAINTENANCE option from the
MANAGEMENT FUNCTIONS screen.
2. Select the ADMINISTRATION PASSWORD option.
D
ESCRIPTION
:
The ADMINISTRATION PASSWORD is used to perform daily man-
agement functions. This password DOES NOT allow access to
the TERMINAL CONFIGURATION menu.
This password can only be changed when the MASTER PASS-
WORD is used to enter the Management FUNCTIONS area. Use
the options provided to VIEW or CHANGE the password, as shown
in the figures below. When the VIEW option is selected, the cur-
rent password will be displayed for a few seconds. When changing
the password, it must be entered twice, because the characters
entered are not displayed (an asterisk (*) is displayed in place of
each character, for security reasons). The password length can
range from 4 to 12 characters.
E
RROR
C
ONDITIONS
:
A number of feedback screens may appear during password entry.
These screens can appear if the second password entry did not
match the first, you entered an invalid password, or the password
you entered was too short (less than 4 characters).
VIEW
CHANGE