Removing the reject cassette, Removing the reject cassette -10 – Triton 97XX Series Operation Manual User Manual

Page 45

Advertising
background image

O

PERATION

M

ANUAL

- M

ODEL

97XX-Series

4-10

SECTION 4 - CURRENCY HANDLING

TRITON SYSTEMS, INC.

Common notes

Simply place the prepared bundles in the cassette.

3.

Make sure the note pile is as even as possible. If
necessary, use your hands to smooth and level
the pile.

4.

On cassettes that do not use a pusher-plate
locking mechanism, release the pusher plate
against the notes. If the cassette uses pusher-
plate locking, turn the key to release the catch,
allowing the pusher plate to compress the notes.

5.

Close and lock the cassette. Remove the key.
Slide the cassette back into its compartment in
the dispensing mechanism. Make sure the
cassette is fully inserted! You will feel the cassette
latch securely into the snap catches.

Removing the Reject Cassette

The reject tray is located just above the currency cas-
sette in the dispensing mechanism. Follow these steps
to remove the reject tray:

1.

Slide the reject tray out of its compartment in the
dispensing mechanism. Place the tray on a flat
surface.

2.

Unlock the tray using the supplied key. Flip the
top back to gain access to the reject compartment.

Unlock and open reject cassette.

Load notes.

Remove reject cassette.

Place old notes together.

Advertising