Triton 97XX Series Operation Manual - Manual (Page 81)

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS O
PERATION
M
ANUAL
- M
ODEL
97XX-Series
5-26
9700-S ERIES 9705-S ERIES
9710-S ERIES 9750-S ERIES
INJECT NEW CASSETTE ID
F ACTORY D EFAULT : N/A
A CCESS I NSTRUCTIONS :
1. Select DIAGNOSTICS from the MANAGEMENT FUNCTIONS
screen.
2. Select the MORE DIAGNOSTICS option.
3. Select the INJECT NEW CASSETTE ID option.
D ESCRIPTION :
Each Note Cassette contains onboard memory that enables it to
store it’s own identification code. This option allows you to inject a
new ID into a Note Cassette. This option will prompt you to insert
the cassette you want to use into the top feed channel, and will
then provide options for injecting a designation of ‘A’, ‘B’, ‘C’, or ‘D’
into the cassette in this position. When the ID has successfully
been injected, the word DONE will appear. If the operation fails, an
error message will be displayed.
The CASSETTE ID has no direct correlation to the physical posi-
tion of the cassette within the unit, although in most instances the
cassette identified as ‘A’ will be placed in the top position, ‘B’ in the
second, ‘C’ in the third, and ‘D’ in the fourth position. This is not a
requirement, however, since the ID code allows the dispensing
mechanism (and the Cash Dispenser control system) to locate the
cassette no matter which slot it is in.
This function will automatically perform an UNLOCK operation so
that the cassettes can be rearranged as needed to facilitate the
operation. At the conclusion of the procedure, after each cassette
has been placed in its appropriate location, use the LOCK/UN-
LOCK function to LOCK the cassettes into place.
E RROR C ONDITIONS :
If the operation fails, an error message will be displayed.