Triton 97XX Series Operation Manual - Manual (Page 133)

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS O
PERATION
M
ANUAL
- M
ODEL
97XX-Series
5-78
To enter or change an ISO go to the SELECT ISO TO CHANGE
screen and perform the following:
1. Press the Screen Key next to the block where the new ISO
will be entered or an ISO changed.
2. Enter the ISO number (up to six digits in length).
3. Press the “<OK>” key.
If more than one ISO must be entered repeat steps 1 through 3
until all ISO are entered (up to five ISO numbers may be entered).
E RROR C ONDITIONS :
There are no error conditions directly associated with this function.