Triton 97XX Series Operation Manual - Manual (Page 257)

TRITON SYSTEMS, INC.
APPENDIX B - ELECTRONIC LOCK O
PERATION
M
ANUAL
- M
ODEL
97XX-Series
B-2
Entering the Combination
The electronic lock combination consists of six digits. Upon ar-
rival, the combination of the lock should already be set at 1-2-3-4-
5-6. After installation of the safe has been completed,
1. Enter the preset combination and check for proper operation.
After each keypress, the lock will beep. After the final digit has
been entered, the lock will beep twice, and the open period will
begin.
2. When a valid combination has been entered, the operator will
have approximately 3 seconds to open the lock.
3. To open the lock, turn the dial clockwise.
4. After the lock is opened, the door latch may be turned and the
safe opened.
Changing the Combination
To change the combination of the lock, simply follow these direc-
tions.
• Enter six zeros.
• Enter the current combination. (Initially set at 1-2-3-4-5-6)
• Enter the new combination twice.
• The combination is now changed. Enter the new combination
to open the lock.
Lockout Feature
The lock includes a WRONG TRY PENALTY lockout feature that
prevents entry from unauthorized personnel. This feature performs
as follows:
• Entry of four consecutive invalid combinations will disable the
lock for 5 minutes.
• During this lockout period, the panel LED will flash every 10
seconds. During this time no other combination entries will
be allowed.
• At the end of the lockout period, if two more consecutive invalid
combinations are entered, the 5-minute lockout period will
restart.