Triton 97XX Series Operation Manual User Manual
Page 254
TRITON SYSTEMS, INC.
A-3
APPENDIX A - MECHANICAL LOCK
O
PERATION
M
ANUAL
- M
ODEL
97XX-Series
3.
With the last number set at the changing index, hold the dial
securely and insert the change key in the keyhole in the back
of the lock. Make sure the wing is entirely inside the lock and
comes to a positive stop (see Figure 1) before turning the key.
***WARNING***
NEVER INSERT THE CHANGE KEY IN THE LOCK WHEN
THE COVER IS REMOVED. BEFORE TURNING THE
CHANGE KEY, MAKE SURE THE WING OF THE KEY IS
FULLY INSERTED INTO THE LOCK.
4.
Turn key one-quarter turn to the LEFT (see Figure 1). With the
change key in this position, set the new combination as follows:
turn the dial to the LEFT, stopping when the first number of the
new combination aligns with the changing index the FOURTH
time.
5.
Turn dial to the RIGHT, stopping when the second number is
aligned with the changing index, the THIRD time.
6.
Turn the dial to the LEFT, stopping when the third number is
aligned with the changing index, the SECOND time. Holding
the dial in this position, turn the change key back to the RIGHT
and remove it. (See Figure 2.) The new combination you have
chosen is now set in the lock,
***CAUTION***
BEFORE CLOSING THE UNIT
TRY THE NEW COMBINATION SEVERAL TIMES
USING THE OPENING INDEX.
Figure 2
Figure 1