Triton 97XX Series Operation Manual - Manual (Page 203)

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS O
PERATION
M
ANUAL
- M
ODEL
97XX-Series
5-148
9700-S ERIES 9705-S ERIES 9710-S ERIES 9750-S ERIES
ACTIVATE
F ACTORY D EFAULT : N/A
A CCESS I NSTRUCTIONS :
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Select MORE.
4. Select MORE.
5. Select VIEW/MODIFY OPTIONS.
6. Choose ACTIVATE.
D ESCRIPTION :
To activate a FEATURE an activation code must be obtained from
the Triton Systems, Inc., Technical Support Department. When
calling Triton Systems Inc., you will be asked to provide the serial
number that is displayed on the FEATURE 00 SERIAL NUMBER
screen.
Once the activation code is obtained, select the ACTIVATE option
from the FEATURE 00 Menu to display the FEATURES 00 SE-
RIAL NUMBER screen. Enter the activation code into the terminal
while the FEATURE 00 SERIAL NUMBER screen is displayed.
Press <OK>. If the activation code is correct, a screen informing
you that the terminal must be reset to activate the feature is dis-
played. Reset the terminal by depressing the RESET switch on
the card cage or cycling the Main Power Switch on the Power Sup-
ply from ON to OFF to ON.
If the activation code is entered incorrectly, the terminal will beep 4
times and return to the FEATURE 00 Menu.
E RROR C ONDITIONS :
There are no error conditions directly associated with this function.