Triton RL5000 User Manual - Manual (Page 151)

131
E
RROR
R
ECOVERY
1. Press and hold down the CTRL key
(blank key in lower right corner of
alphanumeric keypad). While
holding down the CTRL key, press
the number (1) key. Release both
keys. The Password Entry screen
appears.
2. Enter the Master or User password
at the Password Entry dialog
prompt. The Management
Functions main menu appears.
3. Select the System Parameters
option by pressing number (5) on
the alphanumeric keypad. The
System Parameters main menu
appears, as shown in Figure 7-7.
4. Select Shut Down the Terminal
option by pressing number (4) on
the alphanumeric keypad. The
confirmation dialog appears, as
shown in Figure 7-8.
5. Press the Enter key on the keypad
to accept the option on the
confirmation dialog, which initiates
the shut down procedure.
Fig. 7-7. Terminal system parameters.
Fig. 7-8. Shut down the terminal -
confirmation dialog.
Shut Down (Remove Power) Using Management Functions
C