Rl5000 s, Removing the reject cassette, Rotate dispenser mechanism – Triton RL5000 User Manual User Manual

Page 60

Advertising
background image

4 0

M

ODEL

RL5000 S

ERIES

U

SER

M

ANUAL

4.

Close and lock the reject tray.
Remove the key. Slide the cassette
back into its compartment in the
dispensing mechanism. Make sure
the reject cassette is fully inserted!
You will feel the cassette snap
securely into the catches.

You may wish to record the denomination
and number of notes removed from the re-
ject tray, for use when balancing the note

tray against the cassette/day close records.

3.

Close and lock the security cabinet.

Mechanism in operating position.

5.

Close and lock the cassette. Remove
the key. Slide the cassette back into its
compartment in the dispensing
mechanism. Make sure the cassette is
fully inserted! You will feel the cassette
latch securely into the snap catches.

Removing the Reject Cassette

The reject tray is located just above the cur-
rency cassette in the dispensing mechanism.
Follow these steps to remove the reject tray:

1.

Slide the reject tray out of its
compartment in the dispensing
mechanism. Place the tray on a flat
surface.

2.

Unlock the tray using the supplied
key. Flip the top back to gain access

to the reject compartment.

Remove reject cassette.

Unlock and open reject cassette.

**CAUTION**

DO NOT RECYCLE REJECTED

NOTES INTO A CASSETTE!

Doing so could cause more rejects

and/or currency jams.

Rotate Dispenser Mechanism

1.

After reinstalling the currency and
reject cassettes, pull down on the
swivel platform locking pin to allow
the swivel platform to turn counter-
clockwise.

2.

Rotate the mechanism back to the
operating position and slide the
dispenser back into the cabinet.

Rotate mechanism to operate
position.

3.

Remove any notes in the reject
compartment.

Advertising