Triton RL5000 User Manual - Manual (Page 63)

4 3
C
URRENCY
H
ANDLING
Notes lean against packer plate.
2. Move the pusher plate against the
notes with just enough pressure to hold
the notes.
3. Move the white plastic levers
(Pawls) on the pusher plate to their
fully extended position. This will
allow the pusher plate to retract and
releave pressure from the note
stack when an unlock command is
sent to the dispenser.
Slide packer plate against notes.
Installing Note Cassettes
Once the cassettes have been loaded with
currency, replace them using the reverse of
the steps used to remove the cassettes from
the mechanism. Slide each note cassette into
its slot in the mechanism. Make sure each
cassette is fully inserted.
Once all cassettes have been filled and rein-
serted, follow the remaining prompts for
the Cassette Close procedures. (Cassette
Close procedures, Section 5, Management
Functions)
IMPORTANT: Ensure the Multiple
Amount parameter matches the denomina-
tion of currency in each note cassette! See
the procedure for using the Value function
to set this parameter, in Section 5, Manage-
ment Functions.
Removing the Reject Vault
The reject vault is locked when it is removed
from the dispensing mechanism. The color
indicator shows a green window when the
reject vault is opened for note collection
(inside the dispensing mechanism) and when
it is ready for use.
The color indicator shows a red window
when the reject vault is inserted into the
dispensing mechanism and until it is opened
for rejected note retrieval.
1. Open the outer fascia panel of the se-
curity container, using the key lock on
the front of the panel. Open the com-
bination lock on the security container
door and open the door to gain access
to the dispensing mechanism.
“Pawls” extended.
4. Close the cassette lid. Fold the lid
down to its locked position. The re-
lease button should “pop” out allow-
ing the lid to mate cleanly with the
body of the cassette.