Triton RL5000 User Manual - Manual (Page 188)

M
ODEL
RL5000 U
SER
M
ANUAL
C-4
The File List shows the files in the
selected location that are of the se-
lected type. The Filename, Size and
Date/Time attributes are show for each
file. Use the Left or Right <Arrow>
keys on the keypad to highlight a file.
Press <Enter> on the keypad to ac-
cept the currently highlighted file or
<Cancel> to exit without making a se-
lection. If an Ad graphic was selected,
the Ads properties dialog will appear.
** IMPORTANT **
If you are adding graphics and get a “Memory ” error (Ex: 563, “Low
Memory”), there may be too many or excessively large graphic files stored
in the internal flash memory. It may be necessary to delete some unused
graphic files. To delete files from the internal flash memory:
1. Scroll down/up using the Left or Right <Arrow> keys.
2. Highlight the file to be deleted using the <Ctrl> key.
(Blank key)
2. Press the <CLEAR> key on the keypad.
The Ad Properties dialog allows you to view and/or configure the following Ad
graphic display properties:
F
ILENAME
. This is the name of the Bitmap graphic file that will be displayed at
the times and in the locations specified by the duration, active hours, and active
Ad fields properties. This file was selected in the Add New/Browse dialog. If
you want to select a different file, press the number (1) on the keypad to bring
up the Browse dialog again and choose a different file.
D
URATION
. This is the length of time (in seconds) the indicated Ad graphic will
be displayed on the terminal screen. To set the time, press the number (2) on the
keypad to bring up a data entry dialog. Enter the duration in seconds.
* Note *
The value must be between ‘0’ and ‘99999’ seconds. If the
Ad file is a motion graphic or video and ‘0’ is selected, the Ad
will be displayed for the actual playing time of the file.