Triton RL5000 User Manual - Manual (Page 58)

3 8
M
ODEL
RL5000 S
ERIES
U
SER
M
ANUAL
2. IMPORTANT: The shape of some
notes may be affected by conditions
of storage or bundling, preventing them
from forming neat even piles. If not
corrected, such conditions may cause
notes to be rejected by the dispensing
mechanism.
To compensate for the most common
conditions of slanting or cupped note
piles, follow the directions given next.
Notes with no apparent shape
problems are referred to as “common”
notes.
• Slanting Pile
To avoid dispensing problems caused by a
“slanting” pile, put the notes in neat bundles
of no more than ½ to ¾ inches in thickness
(100-200 notes). Turn every other bundle
around to minimize slanting of the pile
(bundle should have the same height on both
sides, if possible).
Pull the packer back. Some cassettes
allow the pusher-plate to be latched
in position using the key-lock. (Insert)
Alternate slanted bundles.
Loading the Currency
Cassette
1. Unlock the cassette and open the
cassette lid using the supplied key.
Move the pusher plate to the rear of
the cassette (toward the handle).
Note: The pusher plate action will
depend on the type of cassette in use.
Some cassettes require you to maintain
pressure on the pusher plate as needed
while loading notes. Other cassettes
use a locking mechanism to hold the
packer plate in the loading position.
On these cassettes, pull the pusher-
plate all the way back to the handle
end of the cassette and turn the key to
latch the pusher plate into the loading
position.
Unlock note cassette.
Open the note cassette lid.