Triton RL5000 User Manual - Manual (Page 199)

C-15
A
PPENDIX
B - A
DS
G
RAPHICS
U
PDATING
T
ERMINAL
S
OFTWARE
(RL/FT5000)
This step procedure describes how to per-
form a software update for the RL/FT5000.
You will need a Flash drive device (USB
storage device) with the terminal software
loaded in it.
1. From the MAIN MENU screen,
select the SYSTEM PARAM-
ETERS option by pressing the
number (5) on the keypad.
2. Open the Control Panel. Locate
the Docking Board assembly
shown below. Connect the
Flash drive to either of the 2
USB ports available.
3. If your Flash drive has an indi-
cator, it will light briefly, then
extinguish. When light extin-
guishes, this indicates the stor-
age device has been found by
the operating system of the
ATM. If your Flash drive does
not have an indicator, proceed
to the next step.
4. Press the number (7) on the
keypad to access the SOFT-
WARE UPDATE function. This
function searches for the ter-
minal software setup program
on the external storage device.