Alicat MC Series Mass Flow Controller - Manual (Page 14)

14
#C
+21.50
+0.00
CCM MENU
SETPT
0.000
SCCM
Air
PSIA
+13.60
+0.00
SCCM
Main
+0.00
SETPT
0123.4
MENU
SLPM
+123.4
TOTAL/
TIMER
BATCH RESET
0000:09:59 SCC
00123.45
00123.45 Batch Done
The Main display shows pressure,
temperature, set-point, volumetric flow
and mass flow.
Pressing the button adjacent to a
parameter will make that parameter
the primary display unit.
By hitting the MENU button at the
bottom right of the screen you will
enter the Select Menu display.
If your controller was ordered with the
Totalizer option (page 43), pushing the
TOTAL button once will bring up the
Totalizing Mode display. Pushing MENU
will bring up the Select Menu display.
DISPLAYS AND MENUS
The device screen defaults to Main display as soon as power is applied to the controller.
Select Menu
From Select Menu you can change
the selected gas, interact with your
RS-232 / RS-485 settings, read
manufacturer’s data or access the
control set-up display.
Push MAIN to return to the Main display.
Totalizer (option only)
C ONTROL
SETUP
RS232
COMM
MFG
DATA
MAIN
MISC
GAS
SELECT
Select Menu