Alicat MC Series Mass Flow Controller - Manual (Page 47)

47
Accessory: Flow Vision™ SC Software
Flow Vision™ SC
is an intuitive software interface to help your test
cycles run smoother and shorten your engineering time!
Flow Vision™ SC
lets you connect to and communicate with multiple Alicat
units simultaneously. Now you can view virtual displays, control tabs, charts
and data lines from every connected Alicat device on the same screen.
Flow Vision™ SC
supports all RS-232 and RS-485 Serial communication
functions, including: gas selection, tareing, set-point control, valve tuning
and flow averaging.
Session Saving: Save and reload your configuration data with confidence.
Script Building: Create scripts to adjust a controller’s set-point value at
variable specified time intervals.
Charting: Chart as many parameters as you want off as many devices as you
want, with color coding, zooming, and printing functionality.
Alarms: Create software alarms that will notify you of given parameter conditions.
Data Capture & Logging: Capture and log data to either a .csv file or a .txt file.
Improved Data Logging and Data Log File Splitting for easy to manage data.
Accessory: Flow Vision™ MX Software
Alicat’s New Flow Vision™ MX
software gives you an easy way to do
GAS BLENDING using Alicat Mass Flow Controllers and your own PC.
Flow Vision™ MX
software is a simple way to connect up to six Alicat
mass flow controllers and create your own gas mix concentrations.
Using our inexpensive BB9-USB and a single USB connection you can:
• Create your own gas blends
• Adjust flow rates
• Save your specific blend formulas.
All the controllers can be powered through the BB9-USB with a single
power supply.
Just connect your unique gases to each controller, select the gas type either
locally on the controller or through Flow Vision™ MX, manifold the flow
outputs and create your gas mix.