Alicat MC Series Mass Flow Controller - Manual (Page 22)

22
GAS SELECT
Gas Select is accessed by pressing the
button below GAS SELECT on the Select
Menu display.
To select a gas, use the LN-UP and
LN-DN buttons to position the arrow in
front of the desired gas.
Press MODE and then PG-UP or PG-DN
to view a new page in the gas list.
Press SET to record your selection and
return to the MAIN display. The selected
gas will be displayed on the screen.
Note: Gas Select may not be available on
units ordered with a custom gas or blend.
See page 65 for MCS-Series Gas Select List.
Alicat Standard Gas Select List
Air Air
Ar Argon
CH4 Methane
CO Carbon Monoxide
CO2 Carbon Dioxide
C2H6 Ethane
H2 Hydrogen
He Helium
N2 Nitrogen
N2O Nitrous Oxide
Ne Neon
O2 Oxygen
C3H8 Propane
n-C4H10 normal-Butane
C2H2 Acetylene
C2H4 Ethylene
i-C2H10 iso-Butane
Kr Krypton
Xe Xenon
SF6 Sulfur Hexafluoride
C-25 75% Argon / 25% CO2
C-10 90% Argon / 10% CO2
C-8 92% Argon / 8% CO2
C-2 98% Argon / 2% CO2
C-75 75% CO2 / 25% Argon
A-75 75% Argon / 25% Helium
A-25 75% Helium / 25% Argon
A1025 90% Helium / 7.5% Argon / 2.5% CO2
(Praxair - Helistar® A1025)
Star29 90% Argon / 8% CO2 / 2% Oxygen
(Praxair - Stargon® CS)
P-5 95% Argon / 5% Methane
LN-DN
CANCEL SET
MODE
C2H6 Ethane
H2 Hydrogen
He Helium
>N2 Nitrogen
N2O Nitrous Oxide
Ne Neon
LN-UP