Alicat MC Series Mass Flow Controller - Manual (Page 25)

25
MISC2 will display as shown at left.
STP refers to the functions that allow your
selection of standard temperature and
pressure conditions. This feature is generally
useful for comparison purposes to other
devices or systems using different STP
parameters.
The STP menu is comprised of the STP TEMP
and STP PRESS screens.
STP TEMP allows you to select from seven
standard temperature protocols. The arrow
position will automatically default to the
currently stored value.
Once a selection has been made and recorded
using the SET button, a change acknowledgement
message will be displayed on screen.
Selecting RETURN will revert screen to the
Main display. If the SET selection is already
the currently stored value, a message
indicating that fact will appear.
STP PRESS enables you to select from one of
two standard pressure settings.
The arrow position will automatically default
to the currently stored value.
Once a selection has been made and recorded using the SET button, a change
acknowledgement message will be displayed on screen.
Selecting RETURN will revert screen to the Main display. If the SET selection is
already the currently stored value, a message indicating that fact will appear.
DIAG
TEST
BACK MAIN
STP
STP
PRESS
BACK MAIN
STP
TEMP
LN-DN
RETURN
0 C
15 C
15.56 C 60F
20 C
21.11 C 70F
25 C
37 C
S T P C H A N G E D 21.11 C
SET
LN-UP
>
LN-DN
RETURN
1 atm 14.696 PSIA
1 bar 100KPa 14.50P
- - - S T P A L R E A D Y S E T - - -
SET
LN-UP
>
STP TEMP Display STP PRESS Display