HP XP7 Storage - Manual (Page 185)

# ls /dev/rdsk/c1t* | inqraid -CLI -export | ssh <RAID Manager
host> raidscan -find verify
DEVICE_FILE Group PairVol PORT TARG LUN M
SERIAL LDEV
/dev/rdsk/c1t0d0s2 - - - - - -
64015 0
/dev/rdsk/c1t0d1s2 - - - - - -
64015 1
/dev/rdsk/c1t0d2s2 G1 G1-000 CL4-G-1 57 2 -
64015 2
/dev/rdsk/c1t0d3s2 G1 G1-001 CL4-G-1 57 3 -
64015 3
/dev/rdsk/c1t0d4s2 - - - - - -
64015 4
/dev/rdsk/c1t0d5s2 - - - - - -
64015 5
/dev/rdsk/c1t0d7s2 - - - - - -
64015 7
(3) A way to import with horcmstart.sh on RAID Manager host
Example 1 for exporting:
# ls /dev/rdsk/c1t* | inqraid -CLI -export | ssh <RAID Manager
host> cat > /etc/horcmperm*.conf
OR
Example 2 for exporting:
# ls /dev/rdsk/c1t* | inqraid -CLI -export > /tmp/inqraid.ex
ftp "/tmp/inqraid.ex" to "/etc/horcmperm*.conf" on RAID Manager host
This example for importing on RAID Manager host executes horcmstart.sh * on the RAID Manager
host, where * is the instance number.
Display example for verifying on RAID Manager host:
# cat /etc/horcmperm*.conf | raidscan -find verify
DEVICE_FILE Group PairVol PORT TARG LUN M SERIAL LDEV
/dev/rdsk/c1t0d0s2 - - - - - - 64015 0
/dev/rdsk/c1t0d1s2 - - - - - - 64015 1
/dev/rdsk/c1t0d2s2 G1 G1-000 CL4-G-1 57 2 - 64015 2
/dev/rdsk/c1t0d3s2 G1 G1-001 CL4-G-1 57 3 - 64015 3
/dev/rdsk/c1t0d4s2 - - - - - - 64015 4
/dev/rdsk/c1t0d5s2 - - - - - - 64015 5
/dev/rdsk/c1t0d7s2 - - - - - - 64015 7
# pairdisplay -g G1 -fd -l
Group PairVol(L/R) Device_File ,Seq#,LDEV#.P/S,Status,Fence,Seq#,P-LDEV#
M
G1 G1-000(L) c1t0d2s2 64015 2.SMPL ---- ------,----- -----
-
G1 G1-001(L) c1t0d3s2 64015 3.SMPL ---- ------,----- -----
-
Remote volume discovery 185