HP XP7 Storage - Manual (Page 237)

Table 57 SSB codes that are returned by raidcom modify port -loop_id command (continued)
raidcom modify port -loop_id
Description Error code Executing/
Async Error message
SSB2 SSB1
The command device being used at the local RAID Manager
exists under the port. 1039 B955 Executing CMDRJE
The program product is not installed. 104F B955 Executing CMDRJE
Invalid host speed is set for the 4Gbps fibre adapter. The
available host speeds are AUTO, 1G, 2G, and 4G only. 113D B955 Executing CMDRJE
Invalid host speed is set for the 8Gbps fibre adapter. The
available host speeds are AUTO, 2G, 4G, and 8G only. 113F B955 Executing CMDRJE
The other than "10G" cannot be specified when specifying a
host speed of the package for Fibre Channel over Ethernet. 11A5 B955 Executing CMDRJE
Table 58 SSB codes that are returned by raidcom modify port -topology command
raidcom modify port -topology
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified AL-PA is invalid. 044C B955 Executing CMDRJE
The specified topology is invalid. 054E B955 Executing CMDRJE
The other than "fabric on" cannot be specified when specifying
a topology of the package for Fibre Channel over Ethernet. 05A6 B955 Executing CMDRJE
The other than "P-to-P (point to point)" cannot be specified when
specifying a topology of the package for Fibre Channel over
Ethernet. 05A7 B955 Executing CMDRJE
The command device being used at the local RAID Manager
exists under the port. 1039 B955 Executing CMDRJE
The program product is not installed. 104F B955 Executing CMDRJE
Invalid host speed is set for the 4Gbps fibre adapter. The
available host speeds are AUTO, 1G, 2G, and 4G only. 113D B955 Executing CMDRJE
Invalid host speed is set for the 8Gbps fibre adapter. The
available host speeds are AUTO, 2G, 4G, and 8G only. 113F B955 Executing CMDRJE
The other than "10G" cannot be specified when specifying a
host speed of the package for Fibre Channel over Ethernet. 11A5 B955 Executing CMDRJE
Topology FC-AL and 16G as the host speed is not supported
for the 16Gbps fibre adapter. 12AF B955 Executing CMDRJE
Table 59 SSB codes that are returned by raidcom modify port -security _switch command
raidcom modify port -security _switch
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified AL-PA is invalid. 044C B955 Executing CMDRJE
The specified topology is invalid. 054E B955 Executing CMDRJE
The other than "fabric on" cannot be specified when specifying
a topology of the package for Fibre Channel over Ethernet. 05A6 B955 Executing CMDRJE
Error messages and error codes 237