HP XP7 Storage - Manual (Page 250)

Table 69 SSB codes that are returned by raidcom modify ldev -command_device (continued)
raidcom modify ldev -command_device
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified LDEV cannot be released because it is command
device that is being used. 0012 2E30 Executing CMDRJE
The specified volume cannot be set because it is a LUSE volume. 0013 2E30 Executing CMDRJE
The command device cannot be set to the specified LDEV
because of the following causes. 0014 2E30 Executing CMDRJE
•
It is used as a Auto LUN.
•
The reserve attribute of a Auto LUN is configured.
The specified LDEV cannot be set because it has a reserve
attribute of a Data Retention. 0016 2E30 Executing CMDRJE
The specified volume cannot be used as a command device
because it is set by a Data Retention. 0019 2E30 Executing CMDRJE
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Executing CMDRJE
An internal error occurred. FEEC 2EE8 Executing CMDRJE
Call HP Technical Support.
Table 70 SSB codes that are returned by raidcom modify ldev -ssid command
raidcom modify ldev -ssid
Description Error code Executing/
Async Error message
SSB2 SSB1
SSID cannot be changed because there are LDEVs in the
boundary where the specified LDEV belongs. 0023 2E11 Executing CMDRJE
The specified SSID is used for the other boundary. 7201 2E22 Executing CMDRJE
An internal error occurred. Call HP Technical Support. FEEC 2EE8 Executing CMDRJE
The specified parameter is invalid. Check the HP XP7 RAID
Manager Reference Guide. 0002 2EF3 Executing CMDRJE
Table 71 SSB codes that are returned by raidcom modify ldev -status nml command
raidcom modify ldev -status nml
Description Error code Executing/
Async Error message
SSB2 SSB1
It exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
The specified LDEV is used as a Business Copy pair. 0000 2E10 Async Get Command Status
The specified LDEV is used as a Continuous Access Synchronous
pair or a Continuous Access Journal pair. 0001 2E10 Async Get Command Status
The specified LDEV is used as a Compatible FlashCopy
relationship. 0003 2E10 Async Get Command Status
The specified LDEV is used as a Fast Snap or Snapshot pair. 0004 2E10 Async Get Command Status
The specified LDEV is used as a system disk. 0008 2E10 Async Get Command Status
250 Troubleshooting