HP XP7 Storage - Manual (Page 244)

Table 62 SSB codes that are returned by raidcom add journal command (continued)
raidcom add journal
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified volume cannot be used as a journal volume
because it is set by Cache Residency or Cache Residency Z. 0005 2E30 Executing
Async
CMDRJE
Get Command Status
The specified volume cannot be used because it is used in
FICON(R) Data Migration. 0006 2E30 Executing
Async
CMDRJE
Get Command Status
A path is defined in the specified volume. 0007 2E30 Executing CMDRJE
Async Get Command Status
The operation failed because the specified volume is a Quorum
disk. 000C 2E30 Executing
Async
CMDRJE
Get Command Status
The specified volume cannot be used as a journal volume
because it is a system disk. 000D 2E30 Executing
Async
CMDRJE
Get Command Status
The operation failed because the specified volume is a pool
volume of Thin Provisioning. 000E 2E30 Async Get Command Status
The specified volume is already used as a journal volume or a
data volume. 000F 2E30 Async/
Executing
Get Command Status
CMDRJE
The specified volume is used as a command device. 0010 2E30 Executing CMDRJE
Async Get Command Status
The specified volume cannot be used as a journal volume
because it is a LUSE volume. 0013 2E30 Executing
Async
CMDRJE
Get Command Status
The specified volume cannot be used as a journal volume
because it is set by Data Retention or Mainframe Array
Management. 0019 2E30 Executing
Async
CMDRJE
Get Command Status
Using the specified volume is prohibited by Volume Security for
Mainframe. 001A 2E30 Executing
Async
CMDRJE
Get Command Status
The internal volumes and external volumes exist in the specified
journal. 0035 2E30 Executing CMDRJE
The emulation type of the specified volume is not supported. Or,
the combination of an emulation type of the journal volume is
incorrect. 0040 2E30 Async Get Command Status
The volume cannot be registered as a journal volume because
the CLPR number of the specified volume differs from the CLPR
number of the registered journal volume. 0041 2E30 Async Get Command Status
The specified LDEV is a remote command device. 005F 2E30 Executing CMDRJE
The specified volume cannot be used as a journal volume
because it is an external volume that can execute the I/O
suppression mode. 0062 2E30 Executing
Async
CMDRJE
Get Command Status
The specified volume is a reserved volume of a mainframe host. 0064 2E30 Executing CMDRJE
Async Get Command Status
The specified volume is used by the XRC. 0065 2E30 Executing CMDRJE
Async Get Command Status
244 Troubleshooting