HP XP7 Storage - Manual (Page 223)

Table 46 Command error messages (continued)
Value Recommended action Condition Error
message
Error code
216 Please confirm the serial # of the
volumes by using the pairdisplay A or Business Copy volume
is defined in the
configuration file Extended CT group
across RAIDs EX_EXTCTG
command to verify that the CT group
(HORCM_CONF) as a is contained completely within one
RAID storage system.
group that extends across
storage systems.
215 Please confirm whether all CT groups
are already used by mainframe
volumes. An available CT group for
OPEN Volume does not
exist. No CT groups left
for OPEN Vol use. EX_ENXCTG
214 Please confirm the CTGID using the
pairvolchk
command and confirm
The CT group references
within a group do not have
an identical CTGID. Unmatched CTGID
within the group EX_ENQCTG
that group references within the
configuration file (HORCM_CONF)
refer to the same CT group.
213 Please confirm whether
pair-operation is permitted on the A device mentioned in the
configuration file does not Permission denied
with the LDEV EX_ENPERM
device by using the pairdisplay have a permission for a
pair-operation.
or raidscan -find verify
command.
212 Please confirm volume size or
number of LUSE volume using the Size of a volume is
unsuitable between the
remote and local volume. Unmatched volume
size for pairing EX_ENQSIZ
'raidscan -f' command, and make
sure the volume sizes are identical.
211 Please confirm if the type of storage
system is permitted for a RAID A storage system (RAID)
mentioned in the Permission denied
with the RAID EX_ERPERM
Manager by using the inqraid
-CLI
and raidqry -h commands.
configuration file does not
have a permission for RAID
Manager.
209 Please confirm whether a target
volume is setting to SVOL disabling A specified target volume for
SVOL is denied to become SVOL denied due to
be disabling EX_ESVOLD
y using inqraid -fl or SVOL by the setting of Data
Retention.
raidvchkscan -v gflag
command.
210 Please confirm the microcode version
by using the raidqry -l
command. The storage system does not
support a function for RAID
Manager. Microcode not
supported EX_ENOSUP
208 Please confirm the retention time for
a target volume that is set to Data A target volume is denied to
be changing due to retention
time via LDEV guarding. Mode changes
denied due to
retention time EX_EPRORT
Retention by using raidvchkscan
-v gflag
command.
207 Please make the SLPR so that the
target port and the command device
belongs to the same SLPR. A specified command device
does not have a permission
to access other SLPR. Permission denied
with the SLPR EX_ESPERM
206 Please release the pair of older
generations paired volume, or Could not retain the pool for
executing a command due Not enough Pool in
RAID EX_ENOPOL
re-synchronize the pair of split status
paired volume. to be exceeded the threshold
rate.
Error messages and error codes 223