HP XP7 Storage - Manual (Page 249)

Table 68 SSB codes that are returned by raidcom initialize ldev command (continued)
raidcom initialize ldev
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Async Get Command Status
Maintenance work cannot be performed because the target
LDEV is a ESAM Quorum disk. 0001 2E31 Async Get Command Status
LDEV cannot be formatted because there is no normal external
path. 0017 2E31 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EE8 Executing CMDRJE
An internal error occurred. 0A18 2EE8 Async Get Command Status
An internal error occurred. FEEC 2EE8 Executing CMDRJE
Call HP Technical Support. Async Get Command Status
The specified parameter is incorrect. Check the HP XP7 RAID
Manager Reference Guide. 0002 2EF3 Executing CMDRJE
Table 69 SSB codes that are returned by raidcom modify ldev -command_device
raidcom modify ldev -command_device
Description Error code Executing/
Async Error message
SSB2 SSB1
The command device cannot be set to the specified LDEV
because of the following causes. 0000 2E10 Executing CMDRJE
• The LDEV is used as a Business Copy pair.
•
The reserve attribute of a Business Copy is configured.
The specified LDEV is used as a Continuous Access Synchronous
pair. 0001 2E10 Executing CMDRJE
The specified LDEV is used as a Continuous Access Journal pair
or a journal. 0002 2E10 Executing CMDRJE
The specified volume cannot be set because it is used by the
Fast Snap or Snapshot pair. 0004 2E10 Executing CMDRJE
The specified LDEV is not defined. 0000 2E20 Executing CMDRJE
The following settings cannot be performed because the program
product of LUN Manager is not installed. 9000 2E21 Executing CMDRJE
• Command device settings
•
Command security settings
The emulation type of the specified volume is not OPEN volume. 0004 2E30 Executing CMDRJE
The command device cannot be set because LDEV is used as a
Fast Snap or Snapshot virtual volume. 0008 2E30 Executing CMDRJE
The specified volume cannot be set because it is a Quorum disk. 000C 2E30 Executing CMDRJE
The specified volume cannot be set because it is a system disk. 000D 2E30 Executing CMDRJE
The specified volume cannot be set because it is a pool volume. 000E 2E30 Executing CMDRJE
Error messages and error codes 249