HP XP7 Storage - Manual (Page 95)

Specifying a virtual storage machine by command options
Configuration definition file settings when specifying a virtual storage machine by command options
This topic shows configuration definition file settings with the multi-array virtualization function
when specifying a virtual storage machine by command options. For details on other parameters,
see
“Configuration definition file” (page 25) .
•
HORCM_CMD
Specify a volume belonging to meta_resource in XP7 as the command device. RAID Manager
obtains the virtual storage machine information defined in XP7 via the specified command
device, and configure the virtual storage machine components. When you specify a volume
in the virtual storage machine as the command device in the system configuration with the
multi-array virtualization function, you cannot start RAID Manager.
•
HORCM_LDEV
Specify volumes to be copied. Serial numbers of the virtual storage machine and virtual LDEV
IDs must be specified. You cannot specify the volumes with HORCM_DEV in the system
configuration with the multi-array virtualization function. Specify the volumes with
HORCM_LDEV.
•
HORCM_INST
Specify an IP address and a service name of the remote host as it is for not using the multi-array
virtualization function.
Example of the configuration definition files when specifying a virtual storage machine by command
options
Example of the configuration definition files (HORCM0)
The underlined parts indicate the information that needs to modify from the file of the old model.
#/******** HORCM0 on PHOST *****/
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
NONE horcm0 1000 3000
#/********** For HORCM_CMD ****************/
HORCM_CMD
#dev_name
\\.\CMD-367000:/dev/rdsk
HORCM_LDEV
Ora dev1 365000 01:00 h1
Ora dev2 365000 01:01 h1
#/********** For HORCM_INST ****************/
HORCM_INST
#dev_group ip_address service
Ora RHOST horcm1
Example of the configuration definition files (HORCM1)
The underlined parts indicate the information that needs to modify from the file of the old model.
#/******** HORCM1 on RHOST *****/
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
NONE horcm1 1000 3000
#/********** For HORCM_CMD ****************/
HORCM_CMD
#dev_name
multi-array virtualization function (XP7 only) 95