HP XP7 Storage - Manual (Page 273)

Table 85 SSB codes that are returned by raidcom add ssid command
raidcom add ssid
Description Error code Executing/
Async Error message
SSB2 SSB1
The CU number of the RCU exceeds the effective value. 3001 2E00 Executing CMDRJE
The command cannot be executed because the parameter of
the specified RCU is invalid. 3008 2E00 Executing CMDRJE
The CU number is out of effective range. 7100 2E00 Executing CMDRJE
The operation cannot be done because the microcode is being
changed. 8004 2E11 Executing CMDRJE
The serial number, product ID, or SSID of the target storage
system is incorrect. 3000 2E20 Executing CMDRJE
The command cannot be executed because the specified RCU
is not registered. 3001 2E20 Executing CMDRJE
The operation cannot be performed due to one of the following
reasons: 3002 2E22 Executing CMDRJE
• The number of RCUs registered in MCU or RCU is more than
four.
•
The number of RCUs registered in the system is more than
64 in the case of specifying the cu free.
The number of the specified SSIDs is invalid. 3301 2E23 Executing CMDRJE
The command cannot be executed because the RCU
identification code of a path is invalid. 3001 2E31 Executing CMDRJE
An internal error occurred. 00EF 2ED6 Executing CMDRJE
Call HP Technical Support.
The SSID is invalid. 3300 2ED6 Executing CMDRJE
The specified parameter is invalid. Check the HP XP7 RAID
Manager Reference Guide. 3002 2EF3 Executing CMDRJE
Table 86 SSB codes that are returned by raidcom delete ssid command
raidcom delete ssid
Description Error code Executing/
Async Error message
SSB2 SSB1
The CU number of the RCU exceeds the effective value. 3001 2E00 Executing CMDRJE
The command cannot be executed because the parameter of
the specified RCU is invalid. 3008 2E00 Executing CMDRJE
The CU number is out of effective range. 7100 2E00 Executing CMDRJE
The operation cannot be done because the microcode is being
changed. 8004 2E11 Executing CMDRJE
The serial number, the product ID, or the SSID of the remote
storage system is invalid. 3000 2E20 Executing CMDRJE
The command cannot be executed because the specified RCU
is not registered. 3001 2E20 Executing CMDRJE
The number of the specified SSIDs is invalid. 3301 2E23 Executing CMDRJE
Error messages and error codes 273