HP XP7 Storage - Manual (Page 271)

Table 82 SSB codes returned by raidcom modify snapshot (continued)
raidcom modify snapshot
Description Error code Executing/Async Error message
SSB2 SSB1
The specified operation is not supported in the current
microcode version. 8000 2E3F Executing CMDRJE
An internal error occurred. Call HP Technical Support. FEEC 2EC6 Executing CMDRJE
The specified parameter is invalid. Check the HP XP7 RAID
Manager Reference Guide. 0002 2EF3 Executing CMDRJE
Table 83 SSB codes returned by raidcom get snapshot
raidcom get snapshot
Description Error code Executing/Async Error message
SSB2 SSB1
An internal error occurred. Call HP Technical Support. FEEC 2EC5 Executing CMDRJE
Table 84 SSB codes returned by raidcom delete snapshot
raidcom delete snapshot
Description Error code Executing/Async Error message
SSB2 SSB1
The value exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
The MU number exceeds the maximum. 000B 2E00 Executing CMDRJE
The command ends abnormally because the volume out of
the range of LDEV number is specified as the P-VOL of a
Fast Snap or Snapshot pair. 0028 2E00 Executing CMDRJE
The command ends abnormally because the Business Copy
reserved volume is specified as the P-VOL of a Fast Snap
or Snapshot pair. 0033 2E10 Executing CMDRJE
The command ends abnormally because the Auto LUN
source volume is specified as the P-VOL of a Fast Snap or
Snapshot pair. 0034 2E10 Executing CMDRJE
The command ends abnormally because the Auto LUN
target volume is specified as the P-VOL of a Fast Snap or
Snapshot pair. 0035 2E10 Executing CMDRJE
The command ends abnormally because the Auto LUN
reserved volume is specified as the P-VOL of a Fast Snap
or Snapshot pair. 0036 2E10 Executing CMDRJE
The command ends abnormally because the Business Copy
pair is being resynchronized when the volume is shared 0049 2E10 Executing CMDRJE
between the P-VOL of a Fast Snap/Snapshot pair and the
P-VOL of a Business Copy pair.
The command ends abnormally because the Business Copy
pair status is other than PSUS when the volume is shared 004A 2E10 Executing CMDRJE
between P-VOL of a Fast Snap/Snapshot pair and the
S-VOL of a Business Copy pair.
A Snapshot data cannot be obtained because the
Continuous Access Synchronous asynchronous pair status 004D 2E10 Executing CMDRJE
is other than PSUS or PSUE when the volume is shared
Error messages and error codes 271