HP XP7 Storage - Manual (Page 26)

HST1 horcm 1000 3000
HORCM_CMD
#unitID 0... (seq#30014)
#dev_name dev_name dev_name
/dev/rdsk/c0t0d0
#unitID 1... (seq#30015)
#dev_name dev_name dev_name
/dev/rdsk/c1t0d0
HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
oradb oradb1 CL1-A 3 1 0
oradb oradb2 CL1-A 3 1 1
oralog oralog1 CL1-A 5 0
oralog oralog2 CL1-A1 5 0
oralog oralog3 CL1-A1 5 1
oralog oralog4 CL1-A1 5 1 h1
HORCM_INST
#dev_group ip_address service
oradb HST2 horcm
oradb HST3 horcm
oralog HST3 horcm
Configuration file example — Windows servers
The following table lists the parameters defined in the configuration file and specifies the default
value, type, and limit for each parameter.
Table 5 Configuration (HORCM_CONF) parameters
Limit Type Default Parameter
63 characters Character string None ip_address
15 characters Character string or numeric value None Service
None Numeric value* 1000 poll (10 ms)
None Numeric value* 3000 timeout (10 ms)
63 characters Character string None dev_name for
HORCM_CMD
26 RAID Manager software environment