HP XP7 Storage - Manual (Page 66)

<emulation type>][-location <lba>][-mp_blade_id <mp#>]
[-clpr <clpr#>]
Check with the attribute setting
It is checked whether the operation is performed for the existing LDEV or not. If the operation is
attempted to be performed for an LDEV that does not exist, an error is detected.
If it is not clear whether the LDEV as the target of the operation exists in the configuration definition
file (if the target LDEV information does not exist in the configuration definition file), the error is not
detected.
The command as the target of the check is shown below.
•
raidcom add lun -port <port#> [<host group name>] {-ldev_id <ldev#> [-lun_id<lun#>] |
-grp_opt <group option> -device_grp_name <device group name> [<device name>]}
•
raidcom delete lun -port <port#> [<host group name>] {-lun_id <lun#> | -ldev_id <ldev#> |
-grp_opt <group option> -device_grp_name <device group name> [<device name>]}
•
raidcom add journal -journal_id <journal ID#> {-ldev_id <ldev#> …[-cnt<count>] | -grp_opt
<group option> -device_grp_name <device group name> [<device name>]} [-mp_blade_id
<mp#> | -timer_type <timer type>]
•
raidcom delete journal -journal_id <journal ID#> [-ldev_id <ldev#> | -grp_opt <group option>
-device_grp_name <device group name> [<device name>]]
•
raidcom add snap_pool {{-pool_id <pool ID#> [-pool_name <pool naming>] | -pool_name
<pool naming>[-pool_id <pool ID#>]} | -pool_id <pool ID#> -pool_name <pool naming>}}
{-ldev_id <ldev#> …[-cnt<count>] | -grp_opt <group option> -device_grp_name <device
group name> [<device name>]}[-user_threshold <%>]
•
raidcom add thp_pool {{-pool_id <pool ID#> [-pool_name <pool naming>] | -pool_name
<pool naming>[-pool_id <pool ID#>]} | -pool_id <pool ID#> -pool_name <pool naming>}
{-ldev_id <ldev#> …[-cnt <count>] | -grp_opt <group option> -device_grp_name <device
group name> [<device name>]}[ -user_threshold <threshold_1> [<threshold_2>]]
•
raidcom extend ldev {-ldev_id <ldev#> | -grp_opt <group option> -device_grp_name <device
group name> [<device name>]} -capacity <size> | -offset_capacity <size> | -cylinder <size>
•
raidcom check_ext_storage external_grp {-external_grp_id <gno-sgno> | -ldev_id <ldev#> |
-grp_opt <group option> -device_grp_name <device group name> [<device name>]}
•
raidcom add device_grp -device_grp_name <ldev group name> <device name> -ldev_id
<ldev#>… [-cnt <count>]
•
raidcom delete device_grp -device_grp_name <device group name> -ldev_id<ldev#>… [-cnt
<count>]
•
raidcom modify ldev -ldev_id <ldev#> {-status <status> [<level>] | -ldev_name <ldev naming>
| -mp_blade_id <mp#>| -ssid <value> | -command_device < y/n > [Security value]}
•
raidcom initialize ldev {-ldev_id <ldev#> | -grp_opt <group option> -device_grp_name <device
group name> [<device name>]} -operation <type>
Check with the deletion operation
It is checked to ensure that the operation is not intended to be performed for the LDEV that is already
deleted. If it is, an error is detected.
If it is not clear whether the LDEV as the target of the operation exists in the configuration definition
file or not (if the target LDEV information does not exist in the configuration definition file), the error
is not detected.
66 RAID Manager functions on the P9500 and XP7 Storage