Telemetry parameters, Connection parameters, Gsm modem – Vaisala AWS330 User Manual
Page 135: 133 and
Chapter 5 __________________________________________ Software Configuration and Operation
VAISALA ______________________________________________________________________ 133
Telemetry Parameters
Settings in the following sections are used to set telemetry parameters
depending on the type of telemetry device used (GSM, Ethernet) and the
selected protocol.
Connection Parameters
GSM Modem
Before starting to set up the GSM modem, you need to obtain a SIM
card.
NOTE
Even if using a PIN code is optional, it is recommended that you use it to
protect the SIM from unauthorized use. Use a mobile phone to set the
PIN.
The following parameters are available for GSM modem:
1012-165
Figure 79
Setting GSM Modem Parameters
Table 33
GSM Modem Parameters
Set Name
Parameter Name
Use
GSM_Modem pin
PIN code set to SIM card. Leave empty if
not used.
GSM_Modem smscentre
Number for operator's SMS centre.
(1
(1
Parameter is optional. Needed only if using SMS and the network does
not provide this information automatically.