Aalborg TIO Totalizer I/O Flow Monitor/Controller User Manual
Page 51
47
5.3.18 Submenu “Diagnostic Menu”
The Diagnostics Menu can be used for troubleshooting purposes and provides
information about the device’s internal variables. These items (except Events
Register submenu described above) are only informational and cannot be changed
(read only).
a) ADC Input Counts (Read Only)
This menu selection provides raw, average, and filtered values of the
ADC counts for analog input circuitry (read only). A typical display with
ADC Input Counts screen is shown below.
b) Analog Output Values (Read Only)
This menu selection provides information about currently selected analog
output configuration, and DAC counts for analog output circuitry (read
only). A typical display with DAC Output Values screen is shown below.
* ADC Input Counts*
Raw:
3
1221
A:
4
1225
NRF:
4
1226
**********************
Event Reg. Has
been reset!
Press any key...
Reset Event Reg.:
YES
DO YOU WANT
RESET EVENT REG?
Once the “YES” option is selected, the Event Register will be reset and
the following conformation screen will appear.
d)
Reset Event Register (Tabular entry)
The Event Register can be reset by selecting “Reset Event Register”
menu option. A typical display with Reset Event Register screen is
shown below.
NO