Aalborg TIO Totalizer I/O Flow Monitor/Controller - Manual (Page 90)

87
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
Signal Conditioner Settings
Sets/Reads Signal Conditioner Parameters Argument1 = F: Display/Change NR Filter Parameters: NRF Sample Number [1-32] NRF T
ime Limit [0-199]
NRF Error Limit [0.0-10.0%]
16
SC
M Read/Change Device Signal Conditioner Mode N – No Conditioning F – NRF Filter A – Running A
verage
<New Mode> [N, F
, A]
SCM:<value> Example: SCM:F
No Argument (Returns Current Mode)
SCM:<value> Example: SCM:F
D Flow Running A
verage Damping
[0-500 ms] 0 - Disabled
<new value> in ms [0-500]
SCD:<value> Example: SCD:50
No Argument (Returns Current set.)
PWD:<value> Example: SCD:50
F NR Filter Settings: NRF Sample Numb. NRF T
ime Limit
NRF Error Limit
<new value> Sample# [1-32]
<new val.> T
ime Limit
[0-199]
<new val.> Error Limit [0.0-10%]
Example: PWF:4,8,0.0
No Argument (Returns Current set.)
Example: PWF:4,8,0.0
L Device Flow Linearizer E- Enable D- Disable
<New V
alue>
E or D
SCL:<value> Example: SCL:E
No Argument (Ret. Current settings)
SCL:<value> Example: SCL:E