Aalborg TIO Totalizer I/O Flow Monitor/Controller - Manual (Page 93)

90
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
C Read/Change Device PSP Run/Stop Control Program Set Point Control can be set to: R – Run S – Stop
No Argument (Ret. Current settings)
PSC:<V
alue>
Example: PSC:S
<Settings> R – Run S - Stop
PSC:<V
alue>
Example: PSC:R
Read EEPROM Memor
y
Reads the value in the specified memor
y location.
20
MR
0 to 163 (Memor
y T
able Index)
<memor
y value>
Write EEPROM Memor
y
Writes the specified value to the specified memor
y location.
Use Carefully
, Can cause unit
to malfunction. (Note: Some addresses are write protected!)
21
MW
20 to 163 (Memor
y T
able Index)
<V
alue>
MW
,XXX,<V
alue>
where: XXX=T
able Index
Example: MW
,105,101.3