Aalborg TIO Totalizer I/O Flow Monitor/Controller - Manual (Page 82)

79
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
Diagnostic Events Mask
Display/Set Diagnostic Events Mask Register See list of the Diagnostic Events below
.
5
DM
NO ARGUMENT
(read current
Diagnostic Events Mask Register)
DM:0x9FFF 0x9FFF – diagnostic mask (16 bits wide). Set bit - Enable Clear bit - Disable
<V
alue>
0x0000 - 0xFFFF Set new value NOTE: all 6 characters are required
DM:0x9FFF
Diagnostic Events Latch Mask
Display/Set Diagnostic Events Latch Mask register See list of the Diagnostic Events below
.
6
DL
NO ARGUMENT
(read current
Diagnostic Events Latch Mask register)
DL:0x100F 0x100F – diagnostic latch mask (16 bits wide). Set bit - Enable Clear bit - Disable
<V
alue>
0x0000 - 0xFFFF Set new value to Diagnostic Events Latch Mask register
.
NOTE: all 6 characters are required
DL:0x100F 0x100F – diagnostic latch mask (16 bits wide). Set bit - Enable Clear bit - Disable
Device Info
Read device configuration info: - full scale range (L/min) - device function (M/C) - input settings (V
,C)
- output settings (V
,C)
- low flow cut off (%F
.S.)
- power up delay (sec.)
7
DI
DI: 100.0,M,V
,V
,2.0,2
100.0 – full scale L/min M – device function (meter) V – input (0-5 Vdc) V – output (0-5 Vdc) 2.0 –
Low flow cut off (%F
.S.)
2
–
flow power on delay (sec.)