Aalborg TIO Totalizer I/O Flow Monitor/Controller - Manual (Page 91)

88
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
LCD and Process Screens Settings
Sets/Reads LCD related parameters. Argument 1 = S Process Screens Mask register: 0x00FF – screen mask (8 bits wide). Set bit
– Enable
Clear bit
–
Disable
See list of the Process Screens below: 0x01 – Flow/Set Point, T
o
t#1
0x02 – Flow
, T
o
t#2
0x04 – Flow
,T
ot#1, T
o
t#2
17
L
M LCD Process Screen Mode: S
–
Static
D
–
Dynamic
<New V
alue>
S or D
LM:<value> Example: LM:S
No Argument (Ret. Current settings)
LM:<value> Example: LM:S
C LCD Contrast Level: [0-16]
<new value> [1-16]
LC:<value> Example: LC:6
No Argument (Ret. Current settings)
LC:<value> Example: LC:6
B LCD Back Light Level: [0-19]
<new value> [1-19]
LB:<value> Example: LB:16
No Argument (Ret. Current settings)
LB:<value> Example: LB:16
T Process Screen T
ime
Inter
val in sec. (for
dynamic mode)
<New V
alue>
[1-3600]
LT
:<value>
ExampleL
T:
5
No Argument (Ret. Current settings)
LT
:<value>
ExampleL
T:
5
S Process Screens Mask register
No Argument (read current Screen Mask register)
LS:0x03 0x00FF – screen mask (8 bits wide). Set bit
–
Enable
Clear bit
–
Disable
<V
alue>
0x0000 - 0x00FF Set new value NOTE: all 6 characters are required
LS:0x03