Aalborg TIO Totalizer I/O Flow Monitor/Controller - Manual (Page 92)

89
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
Process Information
Read Process Information Returns: Flow Rate (in current EU) To
talizer #1 (in current EU)
To
talizer #2 (in current EU)
Flow Alarm Status (D,N,L,H) Diagnostic Events Register
18
PI
No Argument
F,T1,T2,F
A,DE
Example: 24.5,1254.2,12.0,N,0x0
Program Set Point
Sets/Reads Program Set Point parameters
19
PS
M Read/Change Device PSP Mode
<New V
alue>
E or D
PSM:<value> Example: PSM:D
No Argument (Ret. Current settings)
PSM:<value> Example: PSM:D
L Read/Change Device PSP Loop Mode
<New V
alue>
E or D
PSL:<value> Example: PSL:D
No Argument (Ret. Current settings)
PSL:<value> Example: PSL:D
P Read/Change Device PSP Step Parameters Read: only one argument is required. Change: all 3 arguments are required.
<Step Number> [1-16]
No Argument (Ret. Current settings)
PSP<step>:<SP>,<T
ime>
Example: PSP02: 50.0,25
<Step Number> [1-16]
<Set Point> [0-100%FS]
<T
ime>
[0-86400 s.]
PSP<step>:<SP>,<T
ime>
Example: PSP02: 50.0,25
A Read/Change Device PSP Mask Register
No Argument (read current PSP Mask register)
PSA:0xFFFF 0x00FF – screen mask (8 bits wide). Set bit
– Step Enabled
Clear bit
– Step Disabled
<V
alue>
0x0000 - 0xFFFF Set new value NOTE: all 6 characters are required
PSA:0xFFFE